MIL-DTL-83196C(USAF)
TABLE IV. Finished measurements for the undershirt.
Size of
Finished Measurements in Inches
Undershirt Chest (±1/2)
Back Length
Sleeve Length
Shoulder Seam
(±1/2)
(±1/2)
(±1/4)
1
15-1/2
24-1/4
19-1/4
4-1/4
2
16-1/2
24-1/2
20
4-1/2
3
17-1/2
24-3/4
20-3/4
4-3/4
4
18-1/2
25
20-1/2
5
5
19-1/2
25-1/4
22-1/4
5-1/4
6
20-1/2
25-1/2
23
5-1/2
7
21-1/2
25-3/4
23-3/4
5-3/4
8
22-1/2
26
24-1/2
6
3.5
Patterns. The underwear shall conform to the patterns referenced on Drawings 68J236,
68J237, 68J238, 68J239, 71387, 71388, 71389, or 71390, as applicable. Standard patterns will
be furnished by the Government (see 6.2). The patterns, which are intended for a butted seam
construction, have no seam allowance. The standard patterns are intended to be used only as a
guide for making the manufacturer's working patterns. The patterns shall not be altered without
prior approval of the procuring activity.
3.6
Label. Each of the undershirts and underpants shall have a label placed at the center back
as specified in table II. The label shall conform to Type I, Classes 1 and 2 of DDD-L-20 and shall
be colorfast when laundered. The label shall be approximately 1-3/4 by 2-3/4 inches. The
manufacturer shall include the applicable information on the label.
Underwear, Double-Knitted, Anti Exposure CWU-22/P
Specification MIL-DTL-83196C(USAF)
Manufacturer's Identification
Contract No.
Date of Manufacture (Month and Year)
Size (include civilian equivalent size from 1.2)
Stock No.
3.7
Workmanship. The underwear shall be constructed in accordance with commonly
accepted industrial workmanship standards. The finished underwear shall be clean and free from
any defects that might adversely affect appearance or serviceability.
4.
VERIFICATION
4.1
Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2
First article inspection. When required (see 6.2), first article inspection shall consist of the
examinations in 4.4 and 4.5 and the test in 4.6.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business