MIL-DTL-83406C
3.4.15 Adhesive.
The adhesive for cementing the spacer material to the coated bladder material shall be a one-
part polyurethane cement (see 6.6).
3.4.16 Connector.
The connector shall conform to MIL-C-83390.
3.4.17 Rubber sleeve.
The rubber sleeve for the connector shall be tubular conforming to class 2, type B, grade 40 or
60 of MIL-R-6855, shall be 3 (±1/16) inches long, shall have an outer diameter of 3/4 (±1/16)
inch, and shall have a wall thickness of 1/8 (±1/32) inch. No silicone or any other lubricant shall
be applied to either the rubber sleeve or the connector prior to assembling the rubber sleeve to
the connector.
3.4.18 Clamps
The clamps for securing the connector to the external tube shall conform to NAS 397-14 and
NAS 397-16.
3.4.19 Leather reinforcement.
The leather for the knife pocket reinforcement and the reinforcement patch over the inflation
sleeve opening shall be black and shall conform to type 1 of MIL-L-43283, except that the
thickness (ounces) shall be 2 to 2-1/2 ounces.
3.4.20 Springs for tube spacer.
The material for the springs of the tube spacer shall be a round, 0.016-inch diameter,
composition 304, wire with a minimum tensile strength of 306,000 psi and a maximum of
336,000 psi per ASTM A313/A313M.
3.4.21 Cloth for the tube spacer.
The cloth for the tube spacer shall be polypropylene netting/mesh cloth with approximately 14 x
12 strands per inch; hole size .05 x .08, 0.020 inches thick, and 19 pounds per 1000 feet
squared.
3.4.22 Rubber band.
The rubber band (see figure 1) shall be 3/4 ±1/16 inch long and 0.035 inch (minimum)
thickness. The color of the rubber band shall be black. The rubber shall comply with class 2,
type A of MIL-R-6855.
3.5
Design.
The anti-g garment shall be a wrap-around garment that extends from the body to over the
calves of the wearer. It shall have an inflatable bladder that will cover the body and the leg
areas of the wearer and a connector that will provide normal and emergency connection and
disconnection of the bladder of the anti-g garment to and from the air pressure source. Both
sides of the anti-g garment shall have external adjustment laces in the body, thigh, and calf
areas; however, the adjustment laces shall have covers that can be unfastened for easy
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business