MIL-DTL-83406C
2.4
Order of precedence.
In the event of a conflict between the text of this document and the references cited herein, the
text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1
First article.
When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.2.
3.2
Qualification.
The anti-g garments furnished under this specification shall be products that are authorized by
the qualifying activity for listing on the applicable qualified products list before contract award
(see 4.3 and 6.3).
3.3
Recycled, recovered, or environmentally preferable materials.
Recycled, recovered, or environmentally preferable materials should be used to the maximum
extent possible, provided that the material meets or exceeds the operational and maintenance
requirements, and promotes economically advantageous life cycle costs.
3.4
Materials and parts.
Except for the metallic materials and parts, the materials and parts of the anti-g garment shall
have been manufactured not more than 12 months prior to the date of delivery of the anti-g
garment.
3.4.1
Basic materials
3.4.1.1 High temperature resistant cloth.
Except for the bladder, the basic fabric for the anti-g garment shall conform to type II of MIL-C-
83429 and shall be sage green, USAF color shade No. 1590 (see 6.3).
3.4.1.2 Polyurethane coated nylon cloth.
The material for the bladder, including the attachment patches, reinforcement of inflation tubes,
external covering, and checklist retainer area of thigh, shall conform to type I of MIL-C-83489.
3.4.2 Reinforcements and bindings.
Unless otherwise specified herein, the reinforcements shall be made of the basic fabric
specified in 3.4.1.1. The 5/16-inch wide (finished), centerfold, bias binding shall be 45 degrees
bias cut 1-1/4 inches to 1-3/8 inches wide from the basic fabric specified in 3.4.1.1.
3.4.3 Adjustment laces and lanyard.
The cord for the lanyard and for the adjustment laces shall conform to type I of MIL-C-83242
and shall approximately match the shade of the basic material in 3.4.1.1.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business