MIL-DTL-85633C
3.4.2 Laminated cloth (Types IV and V). The base cloth for types IV and V coveralls
shall conform to MIL-DTL-32149.
3.4.3 Raschel knit cloth. The knit cloth for the expansion panel shall be a high
temperature resistant aramid, two-bar raschel warp knit conforming to MIL-C-85101. The color
shall be Sage Green 1565 (see 4.5.1).
3.4.4 Aramid cloth (Types IV and V). The aramid cloth for the overvest, pockets, and
pocket tabs shall be a flame resistant, high strength aramid fiber blend conforming to
MIL-C-83429, type II, class 6. The color shall be Sage Green 1590.
3.4.5 Heat seal cloth (Types IV and V). The heat seal cloth for the seat and knee
reinforcement shall conform to Drawing 1370AS502, part number 1370AS502-5.
3.4.6 Zippers.
3.4.6.1 Entry and portal zippers. The entry zipper and portal zipper, as applicable, shall
be an omni-environmental type conforming to Drawing 3769AS103 (see 6.6.1).
3.4.6.2 Zipper thong or tether.
3.4.6.2.1 Zipper thong (Type III). The entry zipper shall have a thong attached. The
thong shall be cut from the laminated cloth specified in 3.4.1. The ends shall be finished to
prevent raveling or fraying and shall finish 3/8 to 1/2 inch wide and 42 inches long ± 1/4 inch when
attached to the zipper pull.
3.4.6.2.2 Zipper thong and tether (Type V).
3.4.6.2.2.1 Zipper thong (Type V). The entry zipper shall have an attached thong
conforming to Drawing 3769AS101.
3.4.6.2.2.2 Detachable tether (Type V). The entry zipper shall have a detachable tether.
The tether shall be cut from aramid cloth specified in 3.4.4. One end shall be attached to a spring
closure snap hook as specified in 3.4.9. The other end of the cloth shall be finished to prevent
raveling or fraying. The tether shall finish 3/8 to 1/2 inch wide and 42 inches long ± 1/4 inch when
attached to the zipper pull.
3.4.6.3 Pockets and overvest zippers (Types IV and V).
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business