MIL-DTL-85633C
AMERICAN SOCIETY FOR TESTING MATERIALS (ASTM) INTERNATIONAL
ASTM-D6193
-
Stitches and Seams, Standard Practice for (DoD adopted)
(Copies of these documents are available from www.atsm.org or ASTM International,
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
NATIONAL AEROSPACE STANDARDS COMMITTEE (NASC)
NASM43770-1
-
Snap Hooks, Wire Body, Fixed Loop Eye, Flat Spring
Closure, with Retainer
(Copies of this document are available from www.aia-aerospace.org or Aerospace
Industries Association, 1000 Wilson Blvd, Suite 1700, Arlington, VA 22209-3901.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 Qualification. The anti-exposure coveralls furnished under this specification shall be
products that are authorized by the qualifying activity for listing on the applicable qualified
products list before contract award (see 4.2 and 6.3). Qualification of any one type and size of
coverall under this specification shall automatically qualify a supplier for all types and all sizes
specified herein.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.3.
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.4 Materials and components. Unless otherwise specified, the materials and components
shall have been manufactured not greater than eighteen months prior to the date of delivery of the
anti-exposure coverall.
3.4.1 Laminated cloth (Types I, II and III). The base cloth for types I, II, and III coveralls
shall be a three layer laminated package conforming to MIL-C-85637.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business